Anti-Shock Microphone Stand
The AT8668S anti-shock microphone stand effectively isolates the mounted microphone from impact vibration and mechanical noise normally transmitted from the surface. The AT8668S is intended for use with microphones for lecterns, pulpits, conference tables and similar surfaces.
Ideal for use with gooseneck microphones and other quick-mount type microphone using industrial standard XLRM 3-pin type connectors.
The At8668S features a press-on/press-off switch that controls the microphone, muting it by 55 dB at 1,000 Hz. The circuitry also operates a light in the switch, powered by the 24-48V phantom source, to indicate when the mic is “on”. Regardless of the switch position, the actual mic operating voltage will be approximately 10-12V less than the phantom source voltage.
|Phantom Power Requirements|
24-48V DC, 3 mA typical
1 dB (150 ohm source, 100k ohm load)
55 dB at 1000Hz 35 dB at 100Hz 30 dB at 50Hz (150 ohm source, 100k ohm load)
XLRF – type, XLRM – type, Switch with LED
112mm X 142mm X 40mm (Width X Depth X Height)