ATW-3211

Audio-Technica’s fourth-generation 3000 Series wireless system

$1099 + shipping (includes gst)

Providing easy setup, versatile operation and rock-solid, richly detailed high-fidelity sound, Audio-Technica’s fourth-generation 3000 Series wireless systems give users the power and flexibility to operate within the congested UHF spectrum.

Frequencies can be easily scanned and selected on the receiver and then synced with the transmitter via IR sync functionality. The 3000 Series even lets users set a backup frequency that can be quickly swapped by pressing the transmitter’s multifunction button in the event of unexpected interference.

This system configuration features an ATW-R3210 receiver along with an ATW-T3201 body-pack transmitter. The ATW-T3201 is equipped with Audio-Technica’s new cH-style screw-down 4-pin connector for secure connection to Audio-Technica’s cH-style lavalier and headworn microphones, or cables. The transmitter features rugged, metal housings and is powered by two AA batteries. Charging terminals on the transmitter work with the ATW-CHG3 and networkable ATW-CHG3N smart charging docks (sold separately) to recharge NiMH batteries. Antenna power is available for powered antennas and other in-line RF devices. A ground-lift switch helps eliminate audible hum caused by ground loops. The system features balanced and unbalanced audio output jacks.

43 MHz UHF tuning bandwidth in FG1 band
Unique multifunction button to switch to a backup frequency
Frequency scan and IR sync functionality for ease of setup
Body-pack transmitter features tactile mute toggle switch
Charging terminals on transmitter to recharge NiMH batteries
Rugged 4-pin cH-style screw-down connector provides secure connection

Overall System
Operating Frequencies	Band FG1: 650.000 to 693.000 MHz
Minimum Frequency Step	25 kHz
Modulation Mode	FM
Maximum Deviation	ATW-T3201: ±38 kHz (THD:10%) ATW-T3202: ±36 kHz (THD:10%)
Simultaneous Use	32 Channels per band
Frequency Response	ATW-T3201: 31 Hz to 15500 Hz ATW-T3202: 25 Hz to 16700 Hz
Operating Range	100 m
Dynamic Range	ATW-T3201 Mic input: > 115 dB (A-weighted), typical ATW-T3201 Inst input: > 112dB (A-weighted), typical ATW-T3202: > 115 dB (A-weighted), typical
Total Harmonic Distortion	<1.0% (at 1 kHz, ±17.5 kHz deviation)
Operating Temperature Range	-5 ºC to +45 ºC
Receiver
Receiving System	True Diversity
Sensitivity	20 dBuV at 60 dBA S/N ratio (50Ω termination)
Maximum Output Level	XLR / Balanced: +14 dBV 6.3 mm (¼””) / Unbalanced: +8 dBV
Antenna Input	BNC-type, 50 Ω
Power Output	12 V DC, 160 mA (combined)
Power Supply	100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
Dimensions	210.0 mm x 191.0 mm x 43.4 mm (W x D x H)
Weight	1100 g, without accessories
Accessories Included	Two Flexible UHF antennas AC adapter (country dependent) Rack Mount Adaptors
Belt Pack
RF Power Output	High: 30 mW, Low: 10 mW (switchable), at 50 Ω
Spurious Emissions	Following Federal and National Regulations
Input Connections	4-Pin screw down cH-Style Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +5V
Battery Type	Two 1.5V AA, not included
Battery Life	High: 8.0 hours / Low: 9.0 hours (alkaline) High: 9.0 hours / Low: 9.5 hours (Ni-MH 1900mAh) Depending on battery type, usage and environmental conditions
Dimensions	64 mm x 82 mm x 23 mm (W x H x D)
Net Weight	102 g