Supplied with Audio-Technica’s versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, upright bass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter on the in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.
Specifications
- Element: Fixed-charge back plate permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 40-20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
- Impedance: 50 ohms
- Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range(typical): 122 dB, 1 kHz at Max SPL
- Signal-to-noise Ratio: 67 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 3.5 mA typical
- Weight: MICROPHONE: 14.5 g, POWER MODULE: 81.2 g
- Dimensions: MICROPHONE: 37.8 mm (1.49") long, 12.2 mm (0.48") diameter, POWER MODULE: 92.9 mm (3.66") long, 18.9 mm (0.74") diameter
- Switches: Flat, roll-off
- Output Connector: Integral 3-pin XLRM-type
- Accessories Furnished: AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch
- Audio-Technica Case Style: M36
FREQUENCY RESPONSE
click image to enlarge
